Cart $0.00 0 items
EvenBright™ Series LED Strips
EvenBright™ LED Flex Strip packs up to 490 SMD LEDs per foot. It allows no spotting and bright light output.More Info
Multi-Dim Series Dimmable Drivers
Multi-Dim series Dimmable drivers are compatible with Forward phase, Magnetic low voltage, Triac dimmers and 0-10V dimmersMore Info
Architectural NeoFlex Strip Light
Architectural NeoFlex Strip lighting for outdoor perimeter, sign lighting applications. Also available in color changing option.More Info
Ultra Thin No Spotting LED Puck Lights
LED World’s Ultra Thin Series Under cabinet Recessed and Surface Mount Puck lightingMore Info
Create beautiful custom lighting with our LED Aluminum Channel Profiles and our LED Flex Strips.More Info
HUEDA™ Color Controller
Wall mountable LED colour controller with multi-zone control, works with ios devices featuring Music controlled colour changingMore Info
We Supply Commercial LED Lighting for Electricians, Manufacturers, Designers and Electrical Contractors
Great product, Simple to install and operate.
An excellent product , both in brightness and colour accuracy. Be sure to use a power supply with overcapacity to maintain voltage which equals performance. Important also to use a heat sink medium , as they run quite hot.
Quick shipping and exactly as shown in the picture. Everything that I expected.
Bought the Standard Wide Channels to house several runs of Phillps Hue Lightstrips. The Hue Lightstrips are roughly 15mm wide, so a standard LED channel (about 12mm wide) isn't sufficient; you need the 20mm bed of the Standard Wide Channel. The channels themselves are of good quality; sturdy and well-finished. You won't cut yourself on sharp edges. My only complaint is that the channel cover is described as opaque; but in reality it is closer to frosted. The Hue Lightstrips are about 1600 lumens, and even at very low settings the individual diodes are quite visible through the frosted cover. If you need a truly opaque cover (wherein individual LED diodes/hotspots are not visible), then this channel's cover is not for you. I had planned to put a run of these under some over-desk cabinets, but in light of the cover's relative transparency, I didn't think that was wise, and mounted them on the back of the desk (reflecting light off the wall) instead.
I placed it under the kitchen cabinet. Very light with a low profile. Easy to attach using optional clips
True natural light. Good product
Used this for under cabinet kitchen lighting. I called the tech support line at LED World for help putting my package together. They were very helpful and thorough and recommended the 2.2 W/ft for my application. I used this with the standard channel and opaque cover as I did not want to see spots of light reflected from a shiny counter top. It is perfect for counter top working. I may add a dimmer at a later date to adjust for ambient light. I was originally going to purchase the 3M roll of LEDs until I saw these 1M long strips with the connectors on both ends. There is one small issue however and that is when you install the 1M long LED strip into the 1M long channel, a tiny bit of the connector stick out at both ends. I would recommend the LED strip be supplied shorter by about 1 cm. A further note on the Tech Support / Order Process. I had made a small mistake on my order (did not order enough channel). I was called by Colin at LED world to review my application and c...