Cart $0.00   0 items

DriveTone LED Driver for Color Temperature and Dimming Control

Product Description

The 90W DriveTone LED driver utilizes a wireless signal to connect with the additional DimTone Dynamic Wall Switch to provide smooth, dimming down to 0.1% with CCT strip.  It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost.

DimTone single-switch dimmer (optional) can be used with up to seven DriveTone LED Drivers. This  end-to-end approach eliminating redundant components and compatibility issues for superior performance. One can easily customizing the light temperature with a touch of a switch. Deep warm whites or cooler white. Device pairing takes place automatically when the light is first switched on, no technical knowledge necessary.

Note: TONE-WSW dimmer must be used with the DriveTone – 24VDC , 90W Tunable Control LED Driver.

This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.


DriveTone Dimmable LED Driver Features

Smooth Color Temperature Control
No Extra Components Necessary
UL Listed Class 2
Superior Flicker-Free Dimming to 0.1%
No Compatibility Issues
Current Limit Overload Protection
Auto-Reset Short Circuits Protection

Technical Specifications

Rated Power90W
Rated Current3.75A
Rated Voltage24VDC
No Load Voltage25.2VDC
Voltage Ripple and Noise300mV (Vp-p)
Input Voltage120VAC +/- 10%
Input Frequency60Hz
Power Factor0.96
Efficiency (Max Load)89%
Over CurrentCC Mode
Short CircuitHiccup mode, auto-recovery after short circuit removed
SizeL 8”(213mm) x W 4.1”(104mm) x H 1.5”(38mm)
CertificationscULus Listed

Accessories

  • DimTone Dynamic White Wall Switch System

    Input120VAC-60Hz
    max Load700W
    Load TypeCCT Dimmable LEDs
    $74.50
    Add to cart More Info
  • Reviews

    There are no reviews yet.

    Be the first to review “DriveTone LED Driver for Color Temperature and Dimming Control”

    Your email address will not be published.

    Description

    Product Description

    The 90W DriveTone LED driver utilizes a wireless signal to connect with the additional DimTone Dynamic Wall Switch to provide smooth, dimming down to 0.1% with CCT strip.  It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost.

    DimTone single-switch dimmer (optional) can be used with up to seven DriveTone LED Drivers. This  end-to-end approach eliminating redundant components and compatibility issues for superior performance. One can easily customizing the light temperature with a touch of a switch. Deep warm whites or cooler white. Device pairing takes place automatically when the light is first switched on, no technical knowledge necessary.

    Note: TONE-WSW dimmer must be used with the DriveTone – 24VDC , 90W Tunable Control LED Driver.

    This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.


    DriveTone Dimmable LED Driver Features

    Smooth Color Temperature Control
    No Extra Components Necessary
    UL Listed Class 2
    Superior Flicker-Free Dimming to 0.1%
    No Compatibility Issues
    Current Limit Overload Protection
    Auto-Reset Short Circuits Protection
    Technical Specs

    Technical Specifications

    Rated Power90W
    Rated Current3.75A
    Rated Voltage24VDC
    No Load Voltage25.2VDC
    Voltage Ripple and Noise300mV (Vp-p)
    Input Voltage120VAC +/- 10%
    Input Frequency60Hz
    Power Factor0.96
    Efficiency (Max Load)89%
    Over CurrentCC Mode
    Short CircuitHiccup mode, auto-recovery after short circuit removed
    SizeL 8”(213mm) x W 4.1”(104mm) x H 1.5”(38mm)
    CertificationscULus Listed
    Accessories

    Accessories

  • DimTone Dynamic White Wall Switch System

    Input120VAC-60Hz
    max Load700W
    Load TypeCCT Dimmable LEDs
    $74.50
    Add to cart More Info
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “DriveTone LED Driver for Color Temperature and Dimming Control”

    Your email address will not be published.