Cart $0.00   0 items

Wireless DMX Receiver

Wireless DMX 3-pin Female XLR connector – Receiver

  • Works with LC-512X-M (Transmitter)
  • Power Supply included
  • Ready to use right out of the box
  • Turns any DMX Decoder into a Wireless DMX Decoder
  • Eliminate messy wires!

Note: A DMX Decoder is required  but is not included.


Standard DMX512-Female XLR connector
Transmission without delay and no packet loss
Transceiver, auto-switching
Three-color LED display working status and parameters, one-touch operation
126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
6 group can be set ID code, the user can use a separate wireless network in one place without any interference
Can operate in following modes

  1.  1 to 1
  2. 1 to Many
  3. Parallel Transmission
Power supply (Included)5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
Carrier frequency2.4 GHz ISM band, 78 channels
Coverage300 m (line-of-sight)
Parallel operationMax 6 transmitters
DMX connector3-pin Female XLR
DMX channels1 universe (512 channels)
Dimensions with antenna212x18x18 mm
Weight210 g


1) DMX512 connector

Transmitter: 3-pin XLR mounting plug
Receiver: 3-pin XLR mounting jack

2) Power input

Plug in the mains cable of the supplied power unit here.

3) Status indicator

Lights permanently red at the transmitter when a DMX signal is being transmitted.
Flashes green at the receiver when a DMX signal being receive.
Shortly flashes red, green and blue after connecting the power supply.

4) Recessed button

To change the transmission channel and pair the devices.

5) Antenna


  • 5CH DMX512 8 or 16 bit Color Decoder Pro Series H-DMX2108A-5M-3

    Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.

  • LED Colour Decoder LT-840 DMX Zone Controller

    DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting.  Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 4 channels 256 shades of brightness. 

  • New

    24 Channel RDM DMX 512 Decoder SR-2108B-M24-3

    DMX Decoder featuring flicker free 30K PWM frequency, ideal for film making.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB strips as one). Converts analog signal to universal standard DMX512/1990. Uses 24 x 4A channels.

  • Reviews

    There are no reviews yet.

    Be the first to review “Wireless DMX Receiver”

    Your email address will not be published. Required fields are marked *