Cart $0.00   0 items

Wireless DMX Transmitter

Product Description

Wireless DMX 3-pin Male XLR connector- transmitter.

Works with LC-512X-F (Receiver)
Power Supply included
Ready to use right out of the box
Turns any DMX Controller into a Wireless DMX Controller
Eliminate messy wires!

Note: Required DMX Controller or Decoder available in accessories section.


Features

Can operate in following modes.

  •  1 to 1
  • 1 to Many
  • Parallel Transmission
Standard DMX512-Male XLR connector
Transmission without delay and no packet loss
Transceiver, auto-switching
Three-color LED display working status and parameters, one-touch operation
126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
6 group can be set ID code, the user can use a separate wireless network in one place without any interference
Power supply (Included)5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
Carrier frequency2.4 GHz ISM band, 78 channels
ModulationGFSK
Coverage300 m (line-of-sight)
Parallel operationmax 6 transmitters
DMX connector3-pin Male XLR
DMX channels1 universe (512 channels)
Dimensions with antennaL 212mm x W 18mm x H 18mm
Weight210 g

lc-512

1) DMX512 connector

Transmitter: 3-pin XLR mounting plug
Receiver: 3-pin XLR mounting jack

2) Power input

Plug in the mains cable of the supplied power unit here.

3) Status indicator

Lights permanently red at the transmitter when a DMX signal is being transmitted.
Flashes green at the receiver when a DMX signal being receive.
Shortly flashes red, green and blue after connecting the power supply.

4) Recessed button

To change the transmission channel and pair the devices.

5) Antenna

Accessories

  • New

    32 Channel DMX/RDM LED Color Decoder LT-932-OLED

    DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.

    $389.00
    Add to cart More Info
  • Reviews

    There are no reviews yet.

    Be the first to review “Wireless DMX Transmitter”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    Wireless DMX 3-pin Male XLR connector- transmitter.

    Works with LC-512X-F (Receiver)
    Power Supply included
    Ready to use right out of the box
    Turns any DMX Controller into a Wireless DMX Controller
    Eliminate messy wires!

    Note: Required DMX Controller or Decoder available in accessories section.


    Features

    Can operate in following modes.

    •  1 to 1
    • 1 to Many
    • Parallel Transmission
    Standard DMX512-Male XLR connector
    Transmission without delay and no packet loss
    Transceiver, auto-switching
    Three-color LED display working status and parameters, one-touch operation
    126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
    6 group can be set ID code, the user can use a separate wireless network in one place without any interference
    Technical Specs
    Power supply (Included)5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
    Carrier frequency2.4 GHz ISM band, 78 channels
    ModulationGFSK
    Coverage300 m (line-of-sight)
    Parallel operationmax 6 transmitters
    DMX connector3-pin Male XLR
    DMX channels1 universe (512 channels)
    Dimensions with antennaL 212mm x W 18mm x H 18mm
    Weight210 g
    Product Components

    lc-512

    1) DMX512 connector

    Transmitter: 3-pin XLR mounting plug
    Receiver: 3-pin XLR mounting jack

    2) Power input

    Plug in the mains cable of the supplied power unit here.

    3) Status indicator

    Lights permanently red at the transmitter when a DMX signal is being transmitted.
    Flashes green at the receiver when a DMX signal being receive.
    Shortly flashes red, green and blue after connecting the power supply.

    4) Recessed button

    To change the transmission channel and pair the devices.

    5) Antenna

    DMX Decoders

    Accessories

  • New

    32 Channel DMX/RDM LED Color Decoder LT-932-OLED

    DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.

    $389.00
    Add to cart More Info
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “Wireless DMX Transmitter”

    Your email address will not be published. Required fields are marked *