Wireless Dimmer Receiver 902MHz E9X-D02FL

Product Description

902 MHz Constant Voltage LED Dimmers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels.

These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers. Moreover, it overcomes a major challenge faced by traditional LED dimmers. The devices eliminate the issue of choppiness at low dim levels.

The ILLUMRA Constant Voltage LED Dimmers create a single continuous dim — even at low light levels, through the use of thousands of PWM dimming steps.

The dimmers are perfect for energy-saving applications such as architectural dimming, daylighting, load shedding, and manual ON / automatic OFF control. The dimmers may also be used for custom lighting applications. The wireless Dimmer (E3X-D02FP) responds to self-powered wireless light switches, self-powered wireless sensors, wired sensors, and wired switches.

Note: Use only with Low Voltage Class 2 Power Supply (8-28VDC, 40mA – not incl. load current)

Pairing Wireless Switch and Receiver

1) Press LNK button on 902MHz Receiver for 0.5 seconds

2) LED Lights will start to Blink
3) On 902MHz wireless switch press the Top of the Rocker Button once

4) Wait for 30 seconds or Press LNK button on 902MHz for 2 seconds. If LED light stop blinking, both Switch and Receiver are paired and ready to use.
5) Press CLR button to reset pairing and start all over again.

Technical Specifications

Wireless LED Dimmer Control