The RDM DMX 512 Decoder SR-2108B-M24-3 constant voltage DMX Decoder features 24 Channel and 4A per Channel. 24 Channel DMX decoder is designed for professional use where multiple DMX outputs for RGB/W LED Strips are required. Flicker free in 30K PWM frequency, can be used for Ultra HD camera 4K 240 frames/s. The DMX Decoder has multiple connection interface that includes RJ45, 3-pin XLR and terminal block connections for DMX in and out. The terminal block connection also serves as a DMX signal amplifier to ensure data transmission (Cat 5) over long distances. Easy to set DMX address via digital screen panel.
24 Channel DMX-RDM Decoder Features
|Flicker free in 30K PWM frequency for professional camera use 4K 240 frames/s|
|Master & decoder mode, RDM function|
|24x4A channel power rating supports more RGB LED Strips installations|
|Works with 12VDC and 24VDC LED lights.|
|24 channels can be set as same DMX address or different DMX address via digital display|
|Multiple DMX in/out ports: RJ 45, XLR and terminal blocks|
|12 PWM output channels, common anode|
|8 bit and 16 bit PWM output resolution ratio|
|500Hz~30KHz output PWM frequency|
|Gama ray curves value adjustable from 0.1-9.9 as below picture to select linear dimming or logarithmic dimming|
Use SR-2108B-M24-3 DMX in conjunction with a DMX master controller (Such as a HUEDA™ Touch Panel Controller). When used with other DMX decoders, multiple runs can be coordinated to work together in perfect synchronicity over one master connection or multiple 24 channel decoders.
Use only with LED World’s Regulated Class 2 power supplies. Do not use with magnetic or electronic dimmable power supply.
Important note: The maximum length of RGB/W LED Strip attached to DMX Decoder should not exceed 20 linear feet. Due to voltage drop resulting in color loss. For powering, please refer to local electrical codes for low voltage power supplies.