H-DMX2108A-5M-3 is a 5CH DMX512 Color Decoder/Zone Controller (12V ~ 24VDC, 8A per channel output). Ideal for use with RGB and RGBW LED low voltage lighting for camera flicker free lighting control. Can be used in conjunction with a master DMX controller (such as a HUEDA™ ) to control; 1 run of low voltage RGB LED lighting (for each H-DMX2108A-5M-3). When used with other H-DMX2108A-5M-3 DMX decoders, multiple runs can be coordinated to work together in synchronization or be configured in separate zones.
Uses universal standard DMX512/1990. Flicker Free Video Recording. Ideal for TV, stage and theater use. PWM frequency are adjusted to 30K! Multiple connections of DMX in/out ports: RJ 45, XLR and screws terminals. Uses 5 channels with 8 bit (256 shades) and 16 bit shading (8 bit default). Output PWM frequency adjustable from 500HZ ~ 9K HZ. Output dimming curve gamma adjustable value from 0.1 ~ 9.9. For more operation and setup details please refer Product Specs and Instruction PDF.
Use only with LED World’s Regulated Class 2 power supplies.
Note: Do not use with magnetic or electronic dimmable power supply.
Important note: The maximum length of RGB/W LED Flex Strip attached to DMX Decoder should not exceed 20 linear feet (due to voltage drop resulting in color loss).
5CH DMX512 Color Decoder Features
|DMX 512 RDM decoder, RDM function can inter-communicate between DMX master and decoder. e.g. you can set DMX decoder’s address by DMX master console|
|Metal housing, digital display for address data, easily to set and show DMX address|
|Multiple DMX in/out ports: RJ 45, XLR , normal screws|
|Total 5 PWM output channels, common anode. Adjustable DMX channel quantity from 1CH~5CH|
|Adjustable PWM output resolution ratio 8bit , 16bit|
|Adjustable output PWM frequency from 500HZ ~ 9K HZ|
|Adjustable output dimming curve gamma value from 0.1 ~ 9.9|
|Adjustable decoding mode|