Cart $0.00   0 items

LED Grow Strip Triple Bright FA60M50-5M-24V-X-GROW

Product Description

Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength that when a specific range is required for Laboratory growth. Red is 660nm and Blue is 450-460nm.  The LED Grow Strip allows for specific Spectrum with minimal light loss when the Blue and Red is combined. In some circumstance such as laboratories, individual Nano-meter wavelength are required.

LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. This delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.

Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.

The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.

24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.

Note: This product requires an optional Class 2 regulated Power Supply (not included).

Note: See Accessory tab for further optional drivers.

Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.


Features & Benefits

IP22 rated for indoor use.

Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes
Low power consumption and little heat generated
24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only).
LED Grow Strip™ seamlessly operates independently or alongside other lighting
Can be cut to length at marked intervals for custom shapes and sizes

LED Grow Strips™ Red and Blue Graph

Triple Bright Grow Strip Graph

Technical Specifications

Roll Size5 Meters (16.4 Feet)
Max Voltage24 VDC (Regulated/Class 2)
Watts/foot4.4 Watts
AMPs/Roll3A
Max Current/Ft185mA
Light Source60pcs/meter (39.37″) 5050 SMD LED
Dimensions5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″)
LEDs Type5050 SMD LED
LED Angle120°
Brightness396-418 Lumens / ft (30.5cm)
Bend Radius4″(100mm) Max, one flat plane
Lamp Life>25,000 hours estimated average*
MountSmooth Surface/burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ 140°F)

LED Power Supplies

  • 96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2

    Max Continuous Load96 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $144.00
    Add to cart More Info
  • 60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2

    Max Continuous Load60 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current2.5A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $98.50
    Add to cart More Info
  • 30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2

    Max Continuous Load30 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current1.25A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2

    Max Continuous Load192W (2 Tap x 96W)
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current2 x 4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $229.00
    Add to cart More Info
  • 288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2

    Max Continuous Load288W (3 Tap x 96W)
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current3 x 4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $289.00
    Add to cart More Info
  • New

    DriveTone LED Driver for Color Temperature and Dimming Control

    Max Continuous Load90 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current3.75A
    $129.00
    Add to cart More Info
  • Accessories

  • T Connector for Single Color Strip – S10-T2A

    S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs
    $3.50
    Add to cart More Info
  • WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info
  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info
  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info
  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $8.75
    Add to cart More Info
  • Reviews

    There are no reviews yet.

    Be the first to review “LED Grow Strip Triple Bright FA60M50-5M-24V-X-GROW”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength that when a specific range is required for Laboratory growth. Red is 660nm and Blue is 450-460nm.  The LED Grow Strip allows for specific Spectrum with minimal light loss when the Blue and Red is combined. In some circumstance such as laboratories, individual Nano-meter wavelength are required.

    LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. This delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.

    Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.

    The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.

    24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.

    Note: This product requires an optional Class 2 regulated Power Supply (not included).

    Note: See Accessory tab for further optional drivers.

    Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.


    Features & Benefits

    IP22 rated for indoor use.

    Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes
    Low power consumption and little heat generated
    24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only).
    LED Grow Strip™ seamlessly operates independently or alongside other lighting
    Can be cut to length at marked intervals for custom shapes and sizes

    LED Grow Strips™ Red and Blue Graph

    Triple Bright Grow Strip Graph

    Technical Specs

    Technical Specifications

    Roll Size5 Meters (16.4 Feet)
    Max Voltage24 VDC (Regulated/Class 2)
    Watts/foot4.4 Watts
    AMPs/Roll3A
    Max Current/Ft185mA
    Light Source60pcs/meter (39.37″) 5050 SMD LED
    Dimensions5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″)
    LEDs Type5050 SMD LED
    LED Angle120°
    Brightness396-418 Lumens / ft (30.5cm)
    Bend Radius4″(100mm) Max, one flat plane
    Lamp Life>25,000 hours estimated average*
    MountSmooth Surface/burrows free
    Operating Temperature-25°C ~ +40°C (-13°F ~ 140°F)
    Power Supplies

    LED Power Supplies

  • 96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2

    Max Continuous Load96 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $144.00
    Add to cart More Info
  • 60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2

    Max Continuous Load60 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current2.5A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $98.50
    Add to cart More Info
  • 30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2

    Max Continuous Load30 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current1.25A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2

    Max Continuous Load192W (2 Tap x 96W)
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current2 x 4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $229.00
    Add to cart More Info
  • 288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2

    Max Continuous Load288W (3 Tap x 96W)
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current3 x 4A
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $289.00
    Add to cart More Info
  • New

    DriveTone LED Driver for Color Temperature and Dimming Control

    Max Continuous Load90 W
    Voltage24 VDC Output / 100~277 VAC Input
    Rated Current3.75A
    $129.00
    Add to cart More Info
  • Accessories

    Accessories

  • T Connector for Single Color Strip – S10-T2A

    S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.

    Package includes 5pcs
    $3.50
    Add to cart More Info
  • WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info
  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info
  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info
  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $8.75
    Add to cart More Info
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “LED Grow Strip Triple Bright FA60M50-5M-24V-X-GROW”

    Your email address will not be published. Required fields are marked *