Cart $0.00   0 items

12VDC Side Emitting LED Strip light FA120M30-5M-12V-X

Product Description

New 2.9 Watt/ft Side emitting strip features 3014 Epistar SMD LEDs. Low voltage (12VDC) Side emitting LED lighting comes in a flexible ultra sleek thin PCB strip. IP22 rated type A Flex Strip is suitable for dry locations. Side emitting LED Strip available in warm white (3000K) and pure white (5200K). Roll comes in 5m (16.4ft) roll.

Side Emitting LED Strip shines light out to one side of the Flex Strip, rather than straight up. This means that it can be concealed yet still illuminate something from the side. Ideal for creating lighted channel letters such that the lighting emits from the side rather than standard strips that emit light from the surface top.

Like our other LED Flex Strips, Side emitting strip has a 3M tape backing for easy installation. Cut-able LED Strip to size at each 3 LED intervals at marking points.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible. Easily mountable LED Strip onto clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications.

Note: This product requires an optional Class 2 Power Supply (not included).

Note: Accessories are not included with this product. See Accessories tab above.


Features

Side Emitting 3014 Epistar SMD LEDs
LM-80 tested
CRI>90
Low power consumption and little heat generated
Dimmable and Trimmable at every 3 LEDs
Flexible LED light strips
Continuous length
Solid-state, high vibration resistant
Use in Channel letters

Technical Specifications

Watt foot2.9 Watts/ft
Max Voltage12 VDC (Regulated/Class 2)
AMPs/Roll4 Amps
Brightness210-220 lumens / ft
CRI>90
Roll Size5 Meters (16.4 Feet)
LED Type3014 SMD (Super Bright Series)
Light Source120pcs/meter  3014 SMD LED
Dimensions5000(L) x 8(W) x 2(H)mm (16.4′ x 0.31″ x 0.07″)
LED Angle120°
Bend RadiusMax 50 mm (2”) on one Flat plane Axis
Lamp Life>25,000 hours estimated average*
IP RatingIP22 Type A
MountSmooth Clean Surface – burrows free (ambient temperature)
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

Dimmable LED Drivers

  • 60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2

    Max Continuous Load60 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2

    Max Continuous Load30 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2

    Max Continuous Load180W (3 Tap x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $209.00
    Add to cart More Info
  • 300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2

    Max Continuous Load300W (5 Tap x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $279.00
    Add to cart More Info

  • Regulated LED Drivers


  • 60W 12VDC Class 2 LED Power Supply YHY-12005000

    Max Load60W (48W continuous)
    Input Voltage100-240V
    Power Supply TypeRegulated Class 2 (Indoor use)
    CertificationscULus
    Driver with barrel type connector for easy plug in and connect
    $28.50$31.50 Select options
    More Info
  • Accessories

  • WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info
  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info
  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info
  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $8.75
    Add to cart More Info
  • LED Low Voltage Mini Dimmer DIM-2430A

    Max Voltage12V~24VDC (Class 2 regulated)
    Output1 channel 30-Amps (peak)
    DimensionL 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H)
    Brightness0% to 100%
    $23.50
    Add to cart More Info
  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

    $3.25
    Add to cart More Info
  • Reviews

    There are no reviews yet.

    Be the first to review “12VDC Side Emitting LED Strip light FA120M30-5M-12V-X”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    New 2.9 Watt/ft Side emitting strip features 3014 Epistar SMD LEDs. Low voltage (12VDC) Side emitting LED lighting comes in a flexible ultra sleek thin PCB strip. IP22 rated type A Flex Strip is suitable for dry locations. Side emitting LED Strip available in warm white (3000K) and pure white (5200K). Roll comes in 5m (16.4ft) roll.

    Side Emitting LED Strip shines light out to one side of the Flex Strip, rather than straight up. This means that it can be concealed yet still illuminate something from the side. Ideal for creating lighted channel letters such that the lighting emits from the side rather than standard strips that emit light from the surface top.

    Like our other LED Flex Strips, Side emitting strip has a 3M tape backing for easy installation. Cut-able LED Strip to size at each 3 LED intervals at marking points.

    Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible. Easily mountable LED Strip onto clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications.

    Note: This product requires an optional Class 2 Power Supply (not included).

    Note: Accessories are not included with this product. See Accessories tab above.


    Features

    Side Emitting 3014 Epistar SMD LEDs
    LM-80 tested
    CRI>90
    Low power consumption and little heat generated
    Dimmable and Trimmable at every 3 LEDs
    Flexible LED light strips
    Continuous length
    Solid-state, high vibration resistant
    Use in Channel letters
    Technical Specs

    Technical Specifications

    Watt foot2.9 Watts/ft
    Max Voltage12 VDC (Regulated/Class 2)
    AMPs/Roll4 Amps
    Brightness210-220 lumens / ft
    CRI>90
    Roll Size5 Meters (16.4 Feet)
    LED Type3014 SMD (Super Bright Series)
    Light Source120pcs/meter  3014 SMD LED
    Dimensions5000(L) x 8(W) x 2(H)mm (16.4′ x 0.31″ x 0.07″)
    LED Angle120°
    Bend RadiusMax 50 mm (2”) on one Flat plane Axis
    Lamp Life>25,000 hours estimated average*
    IP RatingIP22 Type A
    MountSmooth Clean Surface – burrows free (ambient temperature)
    Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)
    Power Supplies

    Dimmable LED Drivers

  • 60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2

    Max Continuous Load60 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2

    Max Continuous Load30 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
  • 180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2

    Max Continuous Load180W (3 Tap x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $209.00
    Add to cart More Info
  • 300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2

    Max Continuous Load300W (5 Tap x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor/Outdoor use)
    All in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
    $279.00
    Add to cart More Info

  • Regulated LED Drivers


  • 60W 12VDC Class 2 LED Power Supply YHY-12005000

    Max Load60W (48W continuous)
    Input Voltage100-240V
    Power Supply TypeRegulated Class 2 (Indoor use)
    CertificationscULus
    Driver with barrel type connector for easy plug in and connect
    $28.50$31.50 Select options
    More Info
  • Accessories

    Accessories

  • WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info
  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info
  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info
  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $8.75
    Add to cart More Info
  • LED Low Voltage Mini Dimmer DIM-2430A

    Max Voltage12V~24VDC (Class 2 regulated)
    Output1 channel 30-Amps (peak)
    DimensionL 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H)
    Brightness0% to 100%
    $23.50
    Add to cart More Info
  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

    $3.25
    Add to cart More Info
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “12VDC Side Emitting LED Strip light FA120M30-5M-12V-X”

    Your email address will not be published. Required fields are marked *