Product Description
New Multi-Dim 45W 12VDC Class 2 LED Driver is the Regulated Dimmable LED Driver. The 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA features outstanding LED dimming performance. Features architectural quality brightness control and wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. Dimming LED drivers feature an integrated microprocessor. Hence, it automatically senses and optimises dimming performance based on the load and type of used dimming technology.
45W 12VDC Class 2 LED Dimmable Driver Features
Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance |
When a dimmer is set to full brightness there is no loss of top-end light output |
No minimum lighting load required for wide range dimming |
Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over-voltage |
No de-rating, load up to 100% of the model’s rated capacity |
For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
Compatible with both single color and 12V RGB color-changing LED Lighting |
Direct wire or plug-in configuration |
Class 2 power unit with Class II AC inputs, fully isolated case, no ground wire is required |
Rated for 30,000 hours when at 100% power 24 hours a day 50,000 hours (If only on 8~12 hours a day) |
For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
ETL listed for dry or damp locations. (Indoor use only) |
Compatible dimmers and lighting controls
Legacy incandescent standard phase TRIAC dimmers |
Electronic ELV reverse phase trailing edge dimmers |
Magnetic, Low-Voltage (MLV) leading edge dimmers |
12VDC low-voltage Pulse Width Modulation (PWM) dimmers |
Reviews
There are no reviews yet.