60W 12VDC Class 2 Dimmable Driver E60L12DC-KO

Product Description

60W 12VDC Dimmable Class 2 Driver is now available in a smaller compact in size. It has separate hard-wired compartments for easy install and greater reliability. This transformer works with standard TRIAC wall dimmer switch that is rated for “Low Voltage Magnetic” such as the Lutron DVLV-600P-WH.

60W 12VDC Dimmable Class 2 Driver encased in a low profile slim aluminum enclosure. Hence, it makes 60W 12VDC Dimmable Class 2 Driver a perfect choice for various commercial and residential LED applications. Furthermore, The KO version includes a wiring compartment to enable easy-installation and eliminates the need of a J-Box.

Moreover, the E series is UL certified (USA and Canada) and covered by 5-year limited warranty.

Rated to handle a maximum of 60 Watts. Hence, It is strongly recommended that maximum continuous output does not exceed 48W.

Note: Do not use this transformer with RGB controllers.

List of compatible dimmers for our Dimmable Drivers

60W 12VDC Dimmable Class 2 Driver Features

Dimmable with any standard TRIAC dimmer switch
Super compact Aluminium case
Class 2
UL 8750
Withstands wet and salty conditions
Auto-reset protection for short circuits, over-voltage & over-temperature
FCC 15 Part 2
12V DC True RMS

Applications

Strip/Tape Lighting
Tube Lighting
Panels
Fixtures
Cove Lighting
Bar Lighting
Kick Lighting
Under Cabinet Lighting

Technical Specifications

Max. Total Wattage	60W
Output Voltage	12VDC
Input Voltage	120 VAC 60 Hz Class 2
Efficiency	>90%
Operating Temperature	-30°C~70°C (-22°F~158°F)

Can be dimmed VIA hardwire with a magnetic dimmer rated for low voltage magnetic with zero voltage when off (please see instructions enclosed for further important information). Tested with Lutron DVLV-600P (or MFG Part # : DVLV-600PH-WH) Dimmer

LED Driver Installation

Accessories

New

WAGO 221-412 Splicing Connector

WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$1.00 Add to cart

Add to WishlistRemove from Wishlist

More Info

WAGO 221-413 Splicing Connector

WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$1.25 Add to cart

Add to WishlistRemove from Wishlist

More Info

WAGO 221-415 Splicing Connector

WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$2.00 Add to cart

Add to WishlistRemove from Wishlist

More Info