Cart $0.00   0 items

200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC

Part No: XLD200B-412V-FC
Category: Tags: , , , , ,
Product Specifications PDF
259 In stock

$259.00

Product Description

Alpha XLD series 16.6 Amp 200W 12VDC Class 2 LED Power Supply is the industry’s only UL Listed regulated LED driver. As a standalone unit, this unique patented, conduit ready, LED power supply will enable complete installation of your system without having to install external junction boxes. It saves you invaluable time and money in installation and approvals. Suitable for wet location use.

XLD200 200W 12VDC Class 2 LED Power Supply is efficient, reliable and easy to install. The XLD200 200W 12VDC Class 2 LED Power Supply (200 Watt power rating, 16.6 amps) is fully potted. It can work in extremely low temperature environments (-40°C – 60°C).

This unit is actually 4 x 50 Watt power supplies in one box, all Class 2. While the total wattage rating is 200 Watts, it is important to note that it is not one 200 Watt Power Supply (with one output) but rather 4 power supplies of 50 Watts each.

Moreover, this unit features universal input range of 90-277 VAC. It’s user-friendly output voltage/current adjust pots allow easily tune the unit to drive the system at the appropriate power levels. Hence, enables flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 12VDC.

Note: Not for use with a Low Voltage Magnetic (120V AC) dimmer switch.

GRE Alpha’s Easy-Install XLD Series is the industry’s only integrated UL listed Class II solution on the market. Boasting universal AC input, integral wiring compartments for reduced installation costs, constant current and constant voltage dual-mode operation for flexibility and optimal performance, the XLD Series offers up to 92 percent efficiency and heavy-duty design for harsh environments. Other features include user-adjustable output voltage and current, 1-10V dimming options with SLD SmartDim series dimming modules, active power factor correction at PF>0.9, up to four output channels, built-in protection (SCP, OTP, OVP, OCP), IP65 standalone enclosure and UL/CUL listed Class 1 and 2, CE, FCC Title 47 CFR 15 Class B, CQU certifications.

Features

Input Voltage: 90-277 VAC
Output Voltage: Full Load 12V 4×50 watt outputs, DC 16.6 amps max
Over Current Protection
Over Voltage Protection
IP 65 / (UL standard/CSA Standards)
Indoor or Outdoor use
Remote Dimming Options
3 Years Limited Factory Warranty

Technical Specifications

Power4 x 50 W
Output VoltageFull Load 12V DC
Input Voltage90-277 VAC, 200 W
ProtectionOver Current & Voltage Protection
IP RatingIP 65 / (UL standard/CSA listed)
UsageIndoor / Outdoor use
SizeL 312mm x W 113.5mm x H 60.5mm (L12.28″ x W4.46″ x H2.38″)
Dimming OptionsRemote Dimming Options
Warranty3 Years Limited Factory Warranty

Accessories

  • WAGO 221-412 Splicing Connector

    WAGO 221-412 splicing connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info

  • 610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4

    Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.

    $6.25
    Add to cart More Info

  • 0-10V LED Dimmer module SLD-DIM-1B

    0-10V Dimmer module SLD-DIM-1B
    Input Range8-30 VDC
    Input Current5.1A max
    Output Freq1kHz PWM
    Output Current 5.1 max at full load
    $55.25 Discontinued More Info

    • Reviews

    There are no reviews yet.

    Be the first to review “200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    Alpha XLD series 16.6 Amp 200W 12VDC Class 2 LED Power Supply is the industry’s only UL Listed regulated LED driver. As a standalone unit, this unique patented, conduit ready, LED power supply will enable complete installation of your system without having to install external junction boxes. It saves you invaluable time and money in installation and approvals. Suitable for wet location use.

    XLD200 200W 12VDC Class 2 LED Power Supply is efficient, reliable and easy to install. The XLD200 200W 12VDC Class 2 LED Power Supply (200 Watt power rating, 16.6 amps) is fully potted. It can work in extremely low temperature environments (-40°C – 60°C).

    This unit is actually 4 x 50 Watt power supplies in one box, all Class 2. While the total wattage rating is 200 Watts, it is important to note that it is not one 200 Watt Power Supply (with one output) but rather 4 power supplies of 50 Watts each.

    Moreover, this unit features universal input range of 90-277 VAC. It’s user-friendly output voltage/current adjust pots allow easily tune the unit to drive the system at the appropriate power levels. Hence, enables flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 12VDC.

    Note: Not for use with a Low Voltage Magnetic (120V AC) dimmer switch.

    GRE Alpha’s Easy-Install XLD Series is the industry’s only integrated UL listed Class II solution on the market. Boasting universal AC input, integral wiring compartments for reduced installation costs, constant current and constant voltage dual-mode operation for flexibility and optimal performance, the XLD Series offers up to 92 percent efficiency and heavy-duty design for harsh environments. Other features include user-adjustable output voltage and current, 1-10V dimming options with SLD SmartDim series dimming modules, active power factor correction at PF>0.9, up to four output channels, built-in protection (SCP, OTP, OVP, OCP), IP65 standalone enclosure and UL/CUL listed Class 1 and 2, CE, FCC Title 47 CFR 15 Class B, CQU certifications.

    Features

    Input Voltage: 90-277 VAC
    Output Voltage: Full Load 12V 4×50 watt outputs, DC 16.6 amps max
    Over Current Protection
    Over Voltage Protection
    IP 65 / (UL standard/CSA Standards)
    Indoor or Outdoor use
    Remote Dimming Options
    3 Years Limited Factory Warranty
    Technical Specs

    Technical Specifications

    Power4 x 50 W
    Output VoltageFull Load 12V DC
    Input Voltage90-277 VAC, 200 W
    ProtectionOver Current & Voltage Protection
    IP RatingIP 65 / (UL standard/CSA listed)
    UsageIndoor / Outdoor use
    SizeL 312mm x W 113.5mm x H 60.5mm (L12.28″ x W4.46″ x H2.38″)
    Dimming OptionsRemote Dimming Options
    Warranty3 Years Limited Factory Warranty
    Accessories

    Accessories

  • WAGO 221-412 Splicing Connector

    WAGO 221-412 splicing connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.00
    Add to cart More Info

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25
    Add to cart More Info

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $2.00
    Add to cart More Info

  • 610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4

    Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.

    $6.25
    Add to cart More Info

  • 0-10V LED Dimmer module SLD-DIM-1B

    0-10V Dimmer module SLD-DIM-1B
    Input Range8-30 VDC
    Input Current5.1A max
    Output Freq1kHz PWM
    Output Current 5.1 max at full load
    $55.25 Discontinued More Info
    • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC”

    Your email address will not be published. Required fields are marked *