Cart $0.00   0 items

45W 12VDC Class 2 LED Dimmable Driver MD45W12VA

Product Description

New Multi-Dim 45W 12VDC Class 2 LED Driver is the Regulated Dimmable LED Driver. The 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA features outstanding LED dimming performance. Features architectural quality brightness control, and wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. Dimming LED drivers feature an integrated microprocessor. Hence it automatically senses and optimizes dimming performance based on the load and type of used dimming technology.


45W 12VDC Class 2 LED Dimmable Driver Features

Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance
When a dimmer is set to full brightness there is no loss of top-end light output
No minimum lighting load required for wide range dimming
Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature, or over voltage
No de-rating, load up to 100% of the model’s rated capacity
For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch
Compatible with both single color and 12V RGB color-changing LED Lighting
Direct wire or plug-in configuration
Class 2 power unit with Class II AC inputs, fully isolated case –no ground wire is required
Rated for 30,000 hours when at 100% power, 24 hours a day; 50,000 hours if only on 8~12 hours a day
For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch
ETL listed for dry or damp locations. (Indoor use only)

Compatible dimmers and lighting controls

Legacy incandescent standard phase TRIAC dimmers
Electronic ELV reverse phase trailing edge dimmers
Magnetic, Low-Voltage (MLV) leading edge dimmers
12VDC low-voltage Pulse Width Modulation (PWM) dimmers

Technical Specifications

Power 45 Watts
Output Voltage12 VDC Constant Voltage, 45W, 3.75A Max
Input Voltage110-120V AC
VoltageRegulated
SizeL 7.06″ (179.32mm) x W 2.37″ (60.1mm) x H 1″ (25.4mm)
CertificationsETL Listed

Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • LED Driver Enclosure

    LED Driver Enclosure is the UL listed Enclosure for LED World’s 12VDC (MD45W12VA) and 24VDC (MD45W24VA) Power Drivers. Enclosure is UL listed for use in wet, damp and dry locations.

  • Reviews

    There are no reviews yet.

    Be the first to review “45W 12VDC Class 2 LED Dimmable Driver MD45W12VA”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    New Multi-Dim 45W 12VDC Class 2 LED Driver is the Regulated Dimmable LED Driver. The 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA features outstanding LED dimming performance. Features architectural quality brightness control, and wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. Dimming LED drivers feature an integrated microprocessor. Hence it automatically senses and optimizes dimming performance based on the load and type of used dimming technology.


    45W 12VDC Class 2 LED Dimmable Driver Features

    Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance
    When a dimmer is set to full brightness there is no loss of top-end light output
    No minimum lighting load required for wide range dimming
    Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature, or over voltage
    No de-rating, load up to 100% of the model’s rated capacity
    For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch
    Compatible with both single color and 12V RGB color-changing LED Lighting
    Direct wire or plug-in configuration
    Class 2 power unit with Class II AC inputs, fully isolated case –no ground wire is required
    Rated for 30,000 hours when at 100% power, 24 hours a day; 50,000 hours if only on 8~12 hours a day
    For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch
    ETL listed for dry or damp locations. (Indoor use only)

    Compatible dimmers and lighting controls

    Legacy incandescent standard phase TRIAC dimmers
    Electronic ELV reverse phase trailing edge dimmers
    Magnetic, Low-Voltage (MLV) leading edge dimmers
    12VDC low-voltage Pulse Width Modulation (PWM) dimmers
    Technical Specs

    Technical Specifications

    Power 45 Watts
    Output Voltage12 VDC Constant Voltage, 45W, 3.75A Max
    Input Voltage110-120V AC
    VoltageRegulated
    SizeL 7.06″ (179.32mm) x W 2.37″ (60.1mm) x H 1″ (25.4mm)
    CertificationsETL Listed
    Accessories

    Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • LED Driver Enclosure

    LED Driver Enclosure is the UL listed Enclosure for LED World’s 12VDC (MD45W12VA) and 24VDC (MD45W24VA) Power Drivers. Enclosure is UL listed for use in wet, damp and dry locations.

  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “45W 12VDC Class 2 LED Dimmable Driver MD45W12VA”

    Your email address will not be published. Required fields are marked *