150W 24VDC Class 2 LED Driver With DMX Decoder - LW-24150-4C-ADJ

Product Description

24V DC 150 Watt Class 2 DMX LED Driver is the ultimate solution for your color-changing lighting applications where large of DMX color controllers are required. With DMX512 decoding capability built-in, you won’t need an additional DMX512 decoder. This driver also features RDM (Remote Device Management) and NFC (Near Field Communication), allowing you to read and write DMX 512 addresses via android/iOS apps.

Installation is made easy with the driver’s wiring compartments and knock-outs. This 24VDC Class 2 driver, featuring 4 channel output for your RGBW lighting needs.

24VDC Class 2 driver LW-24150-4C-ADJ is suitable for indoor and outdoor location use

Note: Use DMX signal amplifier SR-2100AMP if more than 6 Driver used with single master controller

Universal 120-277VAC Input Voltage for Residential, Commercial and Industrial use.

Download the App

24V Class 2 LED Driver with DMX Decoder Features

Featuring RDM (Remote Device Management), NFC (Near Field Communication) to read and write DMX 512 address
Constant Voltage Output
Protection: Short circuit / Over Loading / Over temperature
cULus listed for dry, damp and wet locations (Indoor/Outdoor use)
Universal AC input: 100~277 VAC
Rated for 30,000 hours at 80% power
Constant Voltage Output
Power Factor > 0.98
High efficiency > 89%
Free Air convection cooling
Suitable for LED lighting and sign lighting applications

Technical Specifications

Rated Power	150W
Output Voltage	24 VDC
Input Voltage	100~277VAC
Rated Current	6.24A
Voltage	Regulated
Power Factor	≥ 0.98 @ 120VAC
Efficiency	> 89%
Operating Temp.	-40°C ~ 60°C (-40°F ~ 140°F) Indoor use
Size	293 L x 125 W x 42.7 H mm (11.53” x 4.92” x 1.68”)
Certifications	cULus Listed

Product Accessories

DMX Touch Panel RGB-W LED Master Controller LW-2812WI

HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.

$148.25

Add to cart More info

DMX512 Signal Amplifier/Repeater – SR-2100AMP

SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.

$44.50

Add to cart More info

WAGO 221-413 Splicing Connector

WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$1.25

Add to cart More info

WAGO 221-415 Splicing Connector

WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$2.00

Add to cart More info

WAGO 221-412 Splicing Connector

WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

$1.00

Add to cart More info

Reviews

There are no reviews yet.

Be the first to review “150W 24VDC Class 2 LED Driver With DMX Decoder – LW-24150-4C-ADJ”

Max Continuous Load	150 W
Voltage	24 VDC Output / 100~277 VAC Input
Rated Current	6.24A
Power Supply Type	DMX512 Class 2 (Indoor/Outdoor use)