Cart $0.00   0 items

200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC

Product Description

XLD series Class 2 8.33A 200W 24VDC Class 2 LED Power Supply is the industry’s only UL Listed LED driver. As a standalone unit, this unique patented, conduit ready LED power supply. It enables complete installation of your system without having to install external junction boxes. Hence, saving you invaluable time and money in installation and approvals.

200W 24VDC Class 2 LED Power Supply is Efficient, Reliable and easy to install. The XLD200B-224V-FC Class 2 LED Power Supply (200 Watt power rating) is fully potted. Moreover, it can work in extremely low temperature environments (-40°C ~ -60°C).

This Unit has 2 x 100 Watt power supplies in one box top comply with Class 2 requirements. While the total wattage rating is 200 Watts, it is important to note that it has two 100 watt sets of output leads (not one 200 Watt Power Supply).

This unit features universal input range of 90-277 VAC and its user-friendly output voltage/current adjust pots allow you to easily tune the unit to drive your system at the appropriate power levels enabling flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 24VDC.

Not for use with a Low Voltage Magnetic (120V AC) dimmer switch.


Features

Indoor / Outdoor use
Input Voltage: 90-277 VAC, 200 watt (2 x 100W outputs) 8.33 Amps
Output Voltage Full Load 24V DC
Over Current Protection
Over Voltage Protection
IP 65 / UL listed (UL standard/CSA listed)
Remote Dimming Options
3 Years Limited Factory Warranty

Technical Specifications

Rated Power200 W (2 x 100 W)
Output VoltageFull Load 24V DC
Input Voltage90-277 VAC
ProtectionOver Current & Voltage Protection
IP RatingIP 65 / (UL standard/CSA listed)
UsageIndoor / Outdoor use
SizeL 312mm x W 113.5mm x H 60.5mm (L 12.28in x W 4.46in x H 2.38in)
Dimming OptionsRemote Dimming Options
Warranty3 Years Limited Factory Warranty

Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4

    Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.

  • 0-10V LED Dimmer module SLD-DIM-1B

    Input Range8-30 VDC
    Input Current5.1A max
    Output Freq1kHz PWM
    Output Current 5.1 max at full load
  • Reviews

    There are no reviews yet.

    Be the first to review “200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC”

    Your email address will not be published. Required fields are marked *

    Description

    Product Description

    XLD series Class 2 8.33A 200W 24VDC Class 2 LED Power Supply is the industry’s only UL Listed LED driver. As a standalone unit, this unique patented, conduit ready LED power supply. It enables complete installation of your system without having to install external junction boxes. Hence, saving you invaluable time and money in installation and approvals.

    200W 24VDC Class 2 LED Power Supply is Efficient, Reliable and easy to install. The XLD200B-224V-FC Class 2 LED Power Supply (200 Watt power rating) is fully potted. Moreover, it can work in extremely low temperature environments (-40°C ~ -60°C).

    This Unit has 2 x 100 Watt power supplies in one box top comply with Class 2 requirements. While the total wattage rating is 200 Watts, it is important to note that it has two 100 watt sets of output leads (not one 200 Watt Power Supply).

    This unit features universal input range of 90-277 VAC and its user-friendly output voltage/current adjust pots allow you to easily tune the unit to drive your system at the appropriate power levels enabling flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 24VDC.

    Not for use with a Low Voltage Magnetic (120V AC) dimmer switch.


    Features

    Indoor / Outdoor use
    Input Voltage: 90-277 VAC, 200 watt (2 x 100W outputs) 8.33 Amps
    Output Voltage Full Load 24V DC
    Over Current Protection
    Over Voltage Protection
    IP 65 / UL listed (UL standard/CSA listed)
    Remote Dimming Options
    3 Years Limited Factory Warranty
    Technical Specs

    Technical Specifications

    Rated Power200 W (2 x 100 W)
    Output VoltageFull Load 24V DC
    Input Voltage90-277 VAC
    ProtectionOver Current & Voltage Protection
    IP RatingIP 65 / (UL standard/CSA listed)
    UsageIndoor / Outdoor use
    SizeL 312mm x W 113.5mm x H 60.5mm (L 12.28in x W 4.46in x H 2.38in)
    Dimming OptionsRemote Dimming Options
    Warranty3 Years Limited Factory Warranty
    Accessories

    Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4

    Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.

  • 0-10V LED Dimmer module SLD-DIM-1B

    Input Range8-30 VDC
    Input Current5.1A max
    Output Freq1kHz PWM
    Output Current 5.1 max at full load
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC”

    Your email address will not be published. Required fields are marked *