Wireless DMX Transmitter

Wireless DMX 3-pin Male XLR connector- transmitter.

Works with LC-512X-F (Receiver)
Power Supply included
Ready to use right out of the box
Turns any DMX Controller into a Wireless DMX Controller
Eliminate messy wires!

Note: Required DMX Controller or Decoder available in accessories section.


Features

Can operate in following modes.

  •  1 to 1
  • 1 to Many
  • Parallel Transmission
Standard DMX512-Male XLR connector
Transmission without delay and no packet loss
Transceiver, auto-switching
Three-color LED display working status and parameters, one-touch operation
126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication
6 group can be set ID code, the user can use a separate wireless network in one place without any interference
Power supply (Included) 5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz
Carrier frequency 2.4 GHz ISM band, 78 channels
Modulation GFSK
Coverage 300 m (line-of-sight)
Parallel operation max 6 transmitters
DMX connector 3-pin Male XLR
DMX channels 1 universe (512 channels)
Dimensions with antenna L 212mm x W 18mm x H 18mm
Weight 210 g

lc-512

1) DMX512 connector

Transmitter: 3-pin XLR mounting plug
Receiver: 3-pin XLR mounting jack

2) Power input

Plug in the mains cable of the supplied power unit here.

3) Status indicator

Lights permanently red at the transmitter when a DMX signal is being transmitted.
Flashes green at the receiver when a DMX signal being receive.
Shortly flashes red, green and blue after connecting the power supply.

4) Recessed button

To change the transmission channel and pair the devices.

5) Antenna

Accessories

  • 5CH DMX512 8 or 16 bit Color Decoder Pro Series

    Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.

  • LED Colour Decoder LT-840 DMX Zone Controller

    DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting.  Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 4 channels 256 shades of brightness. 

  • 24 Channel RDM DMX 512 Decoder SR-2108B-24M-3

    DMX Decoder featuring flicker free 30K PWM frequency, ideal for film making.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB strips as one). Converts analog signal to universal standard DMX512/1990. Uses 24 x 4A channels.

  • 32 Channel DMX/RDM LED Color Decoder

    DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.

  • Reviews

    There are no reviews yet.

    Be the first to review “Wireless DMX Transmitter”

    Your email address will not be published. Required fields are marked *