RGBW LED Flex Strip – FA60M50-XM-24V-RGBW

24VDC high brightness color changing RGBW LED Flex Strip features a new 4 in one 5050 SMD LED Chip. The standard 5050 SMD has three color LEDs Red, Green and Blue. Although, RGBW LED Flex Strip has Red, Green and Blue plus an additional color of Warm White (2700~2900K). RGBW LED Flex Strip roll comes in a 2.56 feet (2 meters) and 16.4 feet (5 meters) long roll in a flexible ultra-thin strip. It has 3M adhesive backing for easy mounting. Use with LED World’s optional HUEDA™ DMX Color Controller.

RGBW LED Strip is ideal for use in color changing applications such as architectural lighting, sign letter lighting, color cove lighting, bar lighting and many more.

RGBW is different from the older RGB-W where each 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.

Type A is suitable for indoor use in dry location. It has a peel and stick double-sided adhesive backing. It is recommended that RGBW LED Strip must be installed in the optional Aluminium Channel (standard wide only) to extend the life of the LEDs. The FA60M50-5M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. The LED strip can be cut to size at marked intervals, every 6 LED (24VDC). Please carefully read instructions before installing.

Note: This product requires an optional Class 2 Power Supply and Color Controller (not included)

Note: It is recommended to use this product with our wide LED Aluminium Profile
Note: Accessories not included with this product but available in accessories section

RGBW LED Flex Strip Features

24 volts DC, 6 watts per foot
Separate Warm White LED for a wider color spectrum of White
Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED.
Can be cut to size at marked intervals and rejoined by experienced personnel
Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F)
Long life span of LED lights of up to 25,000 hours +

Technical Specifications

Watt foot 6 Watts/ft
Max Voltage 24 VDC (Regulated/Class 2)
Watts/Roll 4 Amps Roll
Max Current  250mA/Foot (30.5cm)
Roll Size 2m (6.56ft), 5m (16.4 ft)
Light Source 60 pcs/meter (39.37″) 5050 RGBW SMD LED (4 in 1)
Dimensions 14(W) x 2.5(H)mm (0.55″ x 3/32″)
LEDs Type 5050 SMD LED
LED Angle 120°
Mounting 3M Adhesive Tape, Type A
Pitch Distance of LEDs 16.67 mm
Lamp Life >25,000 hours (70% Lumen Maintenance)
Operating Temperature -25°C ~ +40°C  (-13°F ~ 104°F)

Power Supplies

  • 100W 24VDC Class 2 Driver LV100-24N-UNV-J

    Voltage 24 VDC Output / 120~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP66 (Suitable for Indoor/Outdoor use)
    Warranty 5 Years

  • 200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC

    Input Voltage 90- 277 VAC
    Power Supply Type Regulated Class 2
    IP Rating IP65 (Indoor or Outdoor use)
    Warranty 3 Years

  • HUEDA™ Controllers

  • RF RGBW and Dim Control Remote HUEDA™

    H-2858Z4 RGBW and CCT control remote can control 4 different zones. The remote controller can save up to 4 colors or modes. Works with HUEDA series color controllers and receivers

  • Wireless RGB LED Color Receiver(Slave) HUEDA™

    HUEDA™ wireless Indoor Color Receiver (H-R009PD). Works with Hueda Hand-held Remote, Hueda Hub and Hueda wall mount controller. Wireless control of RGB modules, RGB and RGBW LED Strip lighting (12-24VDC).

  • Outdoor RGB LED Colour Receiver(Slave) HUEDA™

    12~24VDC constant voltage water resistant outdoor RF color receiver with 4 channel (RGBW LED) output to control RGB and RGBW LED Strips. Compatible with the HUEDA™ series Master Controllers.

  • Value line controllers

  • RGB-W Multi-Zone Remote Controller FUT089

    FUT089 Multi-Zone (8 zones) RGB-W LED remote controller with RF 2.4GHz. It covers distance upto 22.8m (75 feet) clear line of sight. Works with our LS2 Color Receiver.

  • LS2 RGB-W LED Receiver (featuring Mesh Network)

    LS2 is the 5 in 1 (RGB, RGBW, CCT, RGB+CCT and single color)  color receiver can control RGB LED Flex Strips of either 12 or 24VDC.  The LS2 controller features auto-transmitting and auto-synchronizing function with brightness, CCT, RGB, RGBW and RGB+CCT output mode.

  • Master Color Controllers

  • DMX Touch Panel RGB-W LED Master Controller HUEDA™

    HUEDA™ multi-zone DMX Touch Panel Master Color controller features  easy to touch and control colors, brightness and color changing speed effects.

  • Wifi and DMX Master RGB Controller Hub HUEDA™

    The H-2818WIN HUEDA™ Hub (master) is a WiFi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless Hueda RF color receivers.

  • Color DMX Decoders

  • 5CH DMX512 8 or 16 bit Color Decoder Pro Series

    Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.

  • LED Colour Decoder LT-840 DMX Zone Controller

    DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting.  Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 4 channels 256 shades of brightness. 

  • 24 Channel RDM DMX 512 Decoder SR-2108B-24M-3

    DMX Decoder featuring flicker free 30K PWM frequency, ideal for film making.  Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB strips as one). Converts analog signal to universal standard DMX512/1990. Uses 24 x 4A channels.

  • Outdoor DMX-512 Decoder HUEDA™

    H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™ and STICK DMX Master

  • Aluminium LED Profile Standard

    Size 1 meter x 15.2mm x 7mm
    Size (Imperial) 3.28 ft x 0.59″ x 0.27″
    Included Items Opaque lens, Mounting clip pair, End cap pair

  • Wide Standard Aluminium Channel

    Size 1 meter x 23.5mm x 11mm
    Size (Imperial) 3.28 ft x 0.92″ x 0.43″
    Included Items Opaque lens, Mounting clip pair, End cap pair

  • Bendable Super Thin Aluminium LED Profile

    Size 1 meter x 18mm x 5.7mm
    Size (Imperial) 3.28 ft x 0.7″ x 0.22″
    Included Items Opaque lens, Mounting clip pair, End cap pair

  • Aluminium LED Profile Recessed

    Length 1 meter, 2 meter (3.28ft, 6.56ft)
    Size 17.1mm x 8.6mm (0.67″ x 0.33″)
    Included Items Opaque lens, Mounting clip pair, End cap pair

    • $13.25$24.00 Select options
  • Aluminium Profile Corner Round

    Size 1 meter x 16mm x 16mm
    Size (Imperial) 3.28 ft x 0.62″ x 0.62″
    Included Items Opaque lens, Mounting clip pair, End cap pair

  • Corner Cove Aluminium LED Profile AC-L016

    Lengths 1 meter (3.28ft), 2 meter (6.56ft)
    Size  30mm (1.18″) x 26.5mm (1.04″)
    Included Items Opaque lens, Mounting clip pair, End cap pair

  • Accessories

  • RGBW Strip Connector RGBW14W1-24

    RGBW14W1-24 Connector for RGBW Strip with five pigtail wires at end. For Use with Class 2 Power Supplies. Max 4 Amps, 12/24V DC. his connector is only compatible with our RGBW FA60M50-5M-24V-RGBW Flex Strip.

  • RGBW Strip Connector RGBW14W2-12

    RGBW14W2-12 Double RGB Connectors with wires in between for RGBW LED Strip. This connector is only compatible with our RGBW FA60M50-5M-24V-RGBW Flex Strip.

  • RGBW 2464 Connector Wire

    Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends

  • Reviews

    There are no reviews yet.

    Be the first to review “RGBW LED Flex Strip – FA60M50-XM-24V-RGBW”

    Your email address will not be published. Required fields are marked *