Cart $0.00   0 items

96W 24VDC 0-10V Dimmable Class 2 Driver CVD96L24DC

The 96 Watt 24VDC CVD96L24DC is  a Class 2 Constant Voltage LED Driver with 0-10V dimming availability.  The UL Listed type enclosures has a built-in junction box on both input and output sides for easy hardwired installation. These drivers are IP65 rated and are suitable for both indoor and outdoor installations.  As a standalone unit this conduit ready LED driver will enable complete installation without having to install external junction boxes. It saves your invaluable time and money in installation and approvals. The  0-10V dimming delivers smooth flicker-free linear dimming down to 1% with most LED’s and a wide variety of compatible dimmers (that use 0-10V dimming).


Features

Class 2 UL listed enclosure with built-in junction box
Universal Input voltage
0-10V dimmable-flicker free down to 1%
Ripple free
IP65 rated for use in indoor/outdoor applications
UL 8750 approved
Auto-Reset protection for short circuit and over temperature
Over load protection – CC Mode

Technical Specifications

Rated Power 96W
Output Voltage Full Load 24V DC
Input Voltage 120-277 VAC, 50/60Hz
Max Output Current  4.1A
Input Current  0.96A
Power Factor >0.95
Dimming Control 0-10V
Min. Dimming level 1%
Dimming Curves Linear
Protection Short circuit and overload protection
Usage Indoor / Outdoor use
Efficiency 87%

Accessories

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • 0-10V Leviton LED Dimmer IP710-DLZ

    0-10V Preset Dimmers feature a low-profile fluid slide bar movement for fine adjustment of light levels that’s accompanied by an easy-to-use ON/OFF preset switch. Controls our low voltage Dim modules (SLD-DIM-1B or NWO-D02FP).

  • Reviews

    There are no reviews yet.

    Be the first to review “96W 24VDC 0-10V Dimmable Class 2 Driver CVD96L24DC”

    Your email address will not be published. Required fields are marked *