Cart $0.00   0 items

24VDC LED Bar Light

Our Triple Bright Series Single Color LED Bar are now available in sleek a 12 inches (30.48 cm) and 40  inches (1 meter) long sleek aluminum bars. 24V Single Color LED Bar available in warm white or pure white color temperature. Installation is easy by simply connecting another bars (max 19 feet/6 Meters of lighting length) together and mounting with the included clips and screws.  Low power consumption, energy saving, and long life span of LED lighting. It is suitable to install cove lighting and under counter lighting. The Super bright 5050 SMD LEDs provide a even bright light only using 11 watts of power for 40″ LED Bar.

Included Items

  • Mounting Clips
  • Screws

Note: Accessories not included, except mounting clips and screws. Accessories available in Accessories Tab.


Applications

Ideal for bars, restaurants and many other uses.
Architectural accent lighting
Under cabinet lighting
Indoor use- dry location

Features

Extendable light bar design (up tp 19 feet max).
Long life span of LED lights, No UV/IR, low heat.
Easy to install, screw mounting brackets and clip.
No dark zones and seamless connection
Power with optional LED drivers 24V DC XLD Drivers.

Technical Specifications

Max voltage 24 VDC
Watts / Bar 4 Watts (12″) / 11 Watts (40″)
Lumens / ft 250-260 Lumens / Bar
Length 12″ (30.48 cm )or 40″ (1 meter)
Certification CE, RoHS, UL listed
Usage Indoor use only

Dimmable LED Drivers

  • 96W 24VDC Dimmable Class 2 Driver E96L24DC-KO

    Voltage 24 VDC Output / 120 VAC 60Hz Input
    Total Wattage 96W max
    Power Supply Type Class 2 Electronic Dimmable
  • Regulated LED Drivers

  • New

    96W 24VDC Class 2 Driver CVN96L24DC

    Voltage 24 VDC Output / 120~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP65 (Suitable for Indoor/Outdoor use)
    Warranty 5 Years
  • Sale!

    200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC

    Input Voltage 90- 277 VAC
    Power Supply Type Regulated Class 2
    IP Rating IP65 (Indoor or Outdoor use)
    Warranty 3 Years
    $239.00 $235.00 Add to cart More Info
  • Accessories

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • Switch Controlled LED Bar Power Connector

    Comes with on/off switch control to connect Single color LED Bar to power source – (30cm) 12″ long

  • LED Bar Power Barrel Connector

    To connect Single color LED Bar to power source – (30cm) 12″ long

  • LED Bar Power pigtail Connector

    To connect Single color LED Bar to power source – (30cm) 12″ long

  • LED Bar to Bar Connector 40″

    To connect Single color LED Bar to Single color LED Bar – (1M) 40″ long

  • Mounting Clips LV-HS-MC58

    Mounting Clip with angle. Comes in pair.

  • Mounting Clips LV-HS-MC30

    Mounting Clip with angle. Comes in pair.

  • Adjustable Mounting Clips LV-HS-MCRT

    Mounting Clip with adjustable angle. Comes in pair.

  • Mounting Clips LV-HS-MC0

    Mounting Clip Flat. Comes in pair.

  • 1 review for 24VDC LED Bar Light

    1. Rated 5 out of 5

      Michael S (verified owner)

      A composite Review to include:
      24VDC LED Bar Light
      45W 24VDC Class 2 LED Dimmable Driver MD45W24VA
      LED Bar Power pigtail Connector
      LED Bar to Bar Connector 40″

      In a word, GREAT! Just remodeled a condo galley kitchen that had a straight run of cabinet uppers on one side and the other side had several challenges: two different upper cabinet heights, the sink and the stove. During the reno when the walls were open, I ran a bridge wire into the wall to get behind the stove and prewired 120v switches, one on each side that would power the LED runs. Once the kitchen was finished and the backsplash and range hood were installed, I was ready to tackle this job myself.

      There was no way that I felt I could mark and accurately drill for the mechanical Light Bar mounting clips working upside down underneath the cabinets, so I opted for 3-M foam mounting tape that I picked up at Home Depot. It is more than strong enough to hold both the 1 foot sections of the LEDs and the Driver module, but required a double strip of tape down the back of the Bar Light channel to make it thick enough to protrude above the connecting power end clips.

      I made a pencil jig to scribe a line here and there to mark my light bar placement and gently placed the now connected LED Light bar modules into place. The 3-M tape is unforgiving so measure your placement accurately. Once up, it’s there for the duration!

      Cut and soldered some connection splices to carry the power behind the different cabinet skirts and in just 3 hours I was done and it looks great. So happy that I went for the Warm White hue and chose the 1 foot preassembled Light Bars. Nothing could be simpler!

      This is a great product for any Do-it-Yourselfer using basic tools and having just average skills. I would recommend LEDWorld heartely and really appreciated the guys on the other end of the phone and email who fielded my many questions about what to order and how to do it.

    Add a review

    Your email address will not be published. Required fields are marked *