Cart $0.00   0 items

LED Strip FA30M50-10M-24V-X

Product Description

Bright Plus LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Bright Plus, Type A Flex Strip is suitable for dry locations. 24V Bright Plus LED Flex Strip roll comes in 10 meters long (32.8 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed.

Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, clean dry surfaces free of burrows.

Its small size and low voltage makes this lighting ideal for a wide range of applications.

Strip can be cut to size by at each 6 LED intervals at marked cutting points(24VDC).

Note: This product requires an optional Class 2 Power Supply (not included).


Features

Dimmable via LED World’s optional dimming solutions
Double sided 3M tape
Low power consumption and little heat generated
Flexible LED light strips
Long life of LEDs
No RF interference
Solid state lighting

Technical Specifications

Roll Size10 Meters (32.8 feet)
Max Voltage24 VDC (regulated)
Watts/foot2.2
AMPs/Roll3A
Max Current/Ft91~92mA
Light Source30pcs/meter (39.37″) 5050 SMD LED
Dimensions10,000(L) x 10(W) x 2.5(H)mm (32.8′ x 3/8″x 3/32″)
Max Length10 Meters (33 feet)
LED Angle120°
Brightness198-209 Lumens / ft (30.5cm)
Bend Radius4″ (100mm) Max, one flat plane
Lamp Life>25,000 hours estimated average*
IP RatingIP22 type A
MountSmooth Solid Surface – burrows free
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)
  • New

    96W 24VDC Class 2 Driver CVN96L24DC

    Voltage24 VDC Output / 120~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
    Warranty5 Years
  • 96W 24VDC Class 2 Dimmable Driver E96L24DC-KO

    Voltage24 VDC Output / 120 VAC 60Hz Input
    Total Wattage96W max
    Power Supply TypeClass 2 Electronic Dimmable
  • Sale!

    200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC

    Input Voltage90- 277 VAC
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
    $239.00 $235.00 Add to cart More Info
  • Aluminium LED Profile Recessed AC-AR1-XM

    Length1 meter, 2 meter (3.28ft, 6.56ft)
    Size17.1mm x 8.6mm (0.67″ x 0.33″)
    Included ItemsOpaque lens, End cap pair
    $13.25$24.00 Select options
    More Info
  • Aluminium Profile Corner Round AC-LA01

    Size1 meter x 16mm x 16mm
    Size (Imperial)3.28 ft x 0.62″ x 0.62″
    Included ItemsOpaque lens, Mounting clip pair, End cap pair
  • Wide Standard Aluminium Channel AC-AS3-1M

    Size1 meter x 23.5mm x 11mm
    Size (Imperial)3.28 ft x 0.92″ x 0.43″
    Included ItemsOpaque lens, Mounting clip pair, End cap pair
    $12.75 Add to cart More Info
  • Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • LED Strip Connector S10W1

    S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with LED Strip without coating or jacket

  • LED Strip Connector S10W2

    S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with LED Strip without coating or jacket

  • LED Strip Connector S10W0

    S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with LED Strip without coating or jacket

  • ST10 T Connector

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 3 pcs of LED Strip Connector (S10W0) included with T connector
  • SL10 L Connector

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 2 pcs of LED Strip Connector (S10W0) included with L connector
  • SX10 X Connector

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 4 pcs of LED Strip Connector (S10W0) included with X connector
  • Description

    Product Description

    Bright Plus LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Bright Plus, Type A Flex Strip is suitable for dry locations. 24V Bright Plus LED Flex Strip roll comes in 10 meters long (32.8 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed.

    Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.

    Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, clean dry surfaces free of burrows.

    Its small size and low voltage makes this lighting ideal for a wide range of applications.

    Strip can be cut to size by at each 6 LED intervals at marked cutting points(24VDC).

    Note: This product requires an optional Class 2 Power Supply (not included).


    Features

    Dimmable via LED World’s optional dimming solutions
    Double sided 3M tape
    Low power consumption and little heat generated
    Flexible LED light strips
    Long life of LEDs
    No RF interference
    Solid state lighting
    Technical Specs

    Technical Specifications

    Roll Size10 Meters (32.8 feet)
    Max Voltage24 VDC (regulated)
    Watts/foot2.2
    AMPs/Roll3A
    Max Current/Ft91~92mA
    Light Source30pcs/meter (39.37″) 5050 SMD LED
    Dimensions10,000(L) x 10(W) x 2.5(H)mm (32.8′ x 3/8″x 3/32″)
    Max Length10 Meters (33 feet)
    LED Angle120°
    Brightness198-209 Lumens / ft (30.5cm)
    Bend Radius4″ (100mm) Max, one flat plane
    Lamp Life>25,000 hours estimated average*
    IP RatingIP22 type A
    MountSmooth Solid Surface – burrows free
    Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)
    Power Supplies
  • New

    96W 24VDC Class 2 Driver CVN96L24DC

    Voltage24 VDC Output / 120~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
    Warranty5 Years
  • 96W 24VDC Class 2 Dimmable Driver E96L24DC-KO

    Voltage24 VDC Output / 120 VAC 60Hz Input
    Total Wattage96W max
    Power Supply TypeClass 2 Electronic Dimmable
  • Sale!

    200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC

    Input Voltage90- 277 VAC
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
    $239.00 $235.00 Add to cart More Info
  • Aluminium Channel
  • Aluminium LED Profile Recessed AC-AR1-XM

    Length1 meter, 2 meter (3.28ft, 6.56ft)
    Size17.1mm x 8.6mm (0.67″ x 0.33″)
    Included ItemsOpaque lens, End cap pair
    $13.25$24.00 Select options
    More Info
  • Aluminium Profile Corner Round AC-LA01

    Size1 meter x 16mm x 16mm
    Size (Imperial)3.28 ft x 0.62″ x 0.62″
    Included ItemsOpaque lens, Mounting clip pair, End cap pair
  • Wide Standard Aluminium Channel AC-AS3-1M

    Size1 meter x 23.5mm x 11mm
    Size (Imperial)3.28 ft x 0.92″ x 0.43″
    Included ItemsOpaque lens, Mounting clip pair, End cap pair
    $12.75 Add to cart More Info
  • Accessories

    Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO H05-415 Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • LED Strip Connector S10W1

    S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with LED Strip without coating or jacket

  • LED Strip Connector S10W2

    S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with LED Strip without coating or jacket

  • LED Strip Connector S10W0

    S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with LED Strip without coating or jacket

  • ST10 T Connector

    ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 3 pcs of LED Strip Connector (S10W0) included with T connector
  • SL10 L Connector

    SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 2 pcs of LED Strip Connector (S10W0) included with L connector
  • SX10 X Connector

    SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with LED Strip without coating or jacket. 

    Note: 4 pcs of LED Strip Connector (S10W0) included with X connector