USA
Product Description
Our Triple Bright Series Single Color LED Bar are now available in sleek a 12 inches (30.48 cm) and 40 inches (1 meter) long sleek aluminum bars. 24V Single Color LED Bar available in warm white or pure white color temperature. Installation is easy by simply connecting another bars (max 19 feet/6 Meters of lighting length) together and mounting with the included clips and screws. Low power consumption, energy saving, and long life span of LED lighting. It is suitable to install cove lighting and under counter lighting. The Super bright 5050 SMD LEDs provide a even bright light only using 11 watts of power for 40″ LED Bar.
Included Items
- Mounting Clips
- Screws
Note: Accessories not included, except mounting clips and screws. Accessories available in Accessories Tab.
Applications
| Ideal for bars, restaurants and many other uses. |
| Architectural accent lighting |
| Under cabinet lighting |
| Indoor use- dry location |
Features
| Extendable light bar design (up tp 19 feet max). |
| Long life span of LED lights, No UV/IR, low heat. |
| Easy to install, screw mounting brackets and clip. |
| No dark zones and seamless connection |
| Power with optional LED drivers 24V DC XLD Drivers. |
Michael S (verified owner) –
A composite Review to include:
24VDC LED Bar Light
45W 24VDC Class 2 LED Dimmable Driver MD45W24VA
LED Bar Power pigtail Connector
LED Bar to Bar Connector 40″
In a word, GREAT! Just remodeled a condo galley kitchen that had a straight run of cabinet uppers on one side and the other side had several challenges: two different upper cabinet heights, the sink and the stove. During the reno when the walls were open, I ran a bridge wire into the wall to get behind the stove and prewired 120v switches, one on each side that would power the LED runs. Once the kitchen was finished and the backsplash and range hood were installed, I was ready to tackle this job myself.
There was no way that I felt I could mark and accurately drill for the mechanical Light Bar mounting clips working upside down underneath the cabinets, so I opted for 3-M foam mounting tape that I picked up at Home Depot. It is more than strong enough to hold both the 1 foot sections of the LEDs and the Driver module, but required a double strip of tape down the back of the Bar Light channel to make it thick enough to protrude above the connecting power end clips.
I made a pencil jig to scribe a line here and there to mark my light bar placement and gently placed the now connected LED Light bar modules into place. The 3-M tape is unforgiving so measure your placement accurately. Once up, it’s there for the duration!
Cut and soldered some connection splices to carry the power behind the different cabinet skirts and in just 3 hours I was done and it looks great. So happy that I went for the Warm White hue and chose the 1 foot preassembled Light Bars. Nothing could be simpler!
This is a great product for any Do-it-Yourselfer using basic tools and having just average skills. I would recommend LEDWorld heartely and really appreciated the guys on the other end of the phone and email who fielded my many questions about what to order and how to do it.